Industrial electrical engineering office

Our teams design, implement, and commission the electrical installation for your factory

Our industrial electricity services

Electrical Room, medium and high voltage switcher, equipment, panel to control and protect the electrical equipment and system by fuse, circuit breaker, control panel at power factory, power plant and substation.

  • DISTRIBUTION

IBITEK group has among its teams, electricians & electrotechnicians experienced in study, sizing, supply, installation and commissioning.

  • INTEGRATION AND CABLING

We ensure the integration and cabling of switchboards and cabinets, thanks to our manufacturing workshops with an area of 800m², located in Casablanca.

Ingénieur effectuant la maintenance des câblages et équipements dans une armoire PLC tout en surveillant un transformateur élévateur
Plan rapproché d’une usine avec lumières allumées, montrant les bâtiments et infrastructures industrielles

  • ERECTION

Our assembly teams also ensure installation and electrical assembly on site.

  • INSTRUMENTATION

We have necessary skills to carry out study, supply, installation and commissioning services in this field.

Electronic manometers measuring pressure with a modern industrial background
Technicien observant les systèmes d’automatisation de l’usine avec les bâtiments visibles en arrière-plan

  • GLOBAL

The services provided by IBITEK group also include, within the framework of turnkey projects, study, supply, installation and commissioning.

Our industrial electricity expertise

Distribution

  • MV / LV Transformation Stations
    – Medium Voltage: 33KV; 22KV; 15KV; 11KV; 7KV; 5.5KV
  • Electrical cabinets
    – Low Voltage: 400VAC, 230VAC, 24VDC

Integration and cabling

  • Electrical panels (MLVS and MCC fixed or disconnectable or removable)
  • Distribution cabinets
  • PLC cabinets & system cabinets
  • Socket boxes & junction boxes

Erection

  • Variable speed drives & starters
  • Analysis cabins
  • Measuring instruments
  • LV capacitor banks
  • Inverters (Online, with bypass, etc.)
  • Lighting (Offices, Workshops, Roads, etc.)
  • Cells, TGBT, Distribution cabinets, junction boxes, ICV, PDC boxes, …

Instrumentation

  • Choice of logic and analog sensors
  • Calibration of analog sensors
  • Remote configuration of analog sensors in Hart topology
  • Intelligent instrumentation (Communicating in Profibus PA)

Global

  • Telephony and intercom
  • Air conditioner
  • Fire detection
  • Arrangement of control rooms & electrical stations
  • lightning protection
  • aircraft warning lights

Contact one of our advisors

We answer your questions

An electrical engineering design office specializes in the design, analysis, and optimization of electrical installations. Its role is to support companies throughout their electrical projects, from feasibility studies through commissioning, while ensuring safety, regulatory compliance, and energy performance.

At IBITEK, our electrical engineering design office acts as a single technical partner. Our technicians are skilled across all electrical disciplines and provide a comprehensive service, including system analysis, power balance studies, compliance with applicable regulations, cable sizing, cost estimation, preparation of drawings, equipment specification, cable requirement definition, and works management.

Engaging an electrical engineering design office is essential to ensure reliable, safe, and high-performance installations. Such an office enables you to:

  • Optimize the electrical network and operating costs;
  • Anticipate technical and regulatory constraints;
  • Secure technical choices over the long term;
  • Efficiently coordinate works with all project stakeholders.

Through its expertise, our electrical engineering design office delivers sustainable and innovative solutions while supporting the project owner at every stage of the project.

The operation of an electrical engineering design office is based on a rigorous and structured methodology:

  1. Analysis of the specifications and client requirements;
  2. Performance of the necessary technical calculations and studies;
  3. Design of electrical drawings and schematics using specialized software (AutoCAD, Caneco, EPLAN, SEE Electrical, DIALux);
  4. Technical validation and support in selecting optimal solutions;
  5. Site supervision and verification of work compliance;
  6. Assistance during commissioning of the installations.

The IBITEK electrical engineering design office ensures comprehensive project follow-up in close coordination with the project owner.

IBITEK’s electrical engineering design office relies on expert electrical engineers and technicians capable of managing projects of any scale.

Through in-depth analysis, rigorous planning, and the use of state-of-the-art professional tools, IBITEK delivers:

  • Clear and actionable technical specifications;
  • Detailed execution drawings;
  • End-to-end technical support;
  • Efficient management of costs, timelines, and quality.

This approach secures your electrical projects and facilitates effective collaboration among all stakeholders involved in the construction process.

Our engineering company delivers turnkey projects internationally, with offices established throughout the EMEA region, including Algeria, Tunisia, and Morocco (CA2E), as well as France, the Czech Republic, and more recently Egypt (Imhosys Company).

To contact IBITEK Group, you may use the contact form or reach us directly via the telephone numbers and local addresses listed on the Contact page.

Our teams are available to review your project, answer your questions, and propose engineering solutions tailored to your needs.